For DT1/DT1 Pro/SR1
When the display is turned on, long press the Plus and Minus buttons to enter or exit the hidden menu. Short press the power switch to switch parameter, press the Plus or Minus button to increase or decrease the value.
P02: Switching between km and mile. 0 means km and 1 means mile. (Default: 0 or 1)
P04: Setting the sleep time between 0-60 minutes. 0 means it never sleeps. (Default: 5 minutes)
P09: Switching between zero and non-zero start, 0 means zero start, and 1 means non-zero start. (Default: 1)
P11: Setting the EABS brake force level, ranging from 1 to 5. 0 means off, 1 means the weakest and 5 means the strongest.
P12: Setting the soft and hard start strength, ranging from 1 to 5. 1 means the softest and 5 means the hardest. (Default: 5)
P16: Remove the ODO data. Keep pressing the Plus button for 5 seconds and the ODO data will be cleared.
P17: Cruise control: 0 means the cruise mode is off, and 1 means the cruise mode is on. (Default: 0)
P18: Binding and unbinding the NFC card. Long press the Plus button to bind, and long press the Minus button to unbind.
P19: Adjusting the backlight brightness. Level 1 is the darkest and level 3 is the brightest. (Default: level 3)
P20: Communication protocol. It cannot be changed. (Default: 4)
Note: Parameter pages not listed above are not adjustable.