Bundle Sale - L2 Max Dual Motor With an Accessory Set - Save $285

• 1 x E-Scooter
• 1 x User Manual
• 1 x Charger
• 1 x Tool Kit
• 1 x Gloves
• 3 x NFC Card (One with Lanyard)

• Yes. The Ausom L2 Max features USB-A and USB-C outputs for easy charging of mobile phones and other devices.

• Yes. The Ausom L2 Max e-scooter is equipped with rear brake lights for safer braking and turn signals for easier and safer turning.

The L2 Max Dual Motor doesn’t include a seat by default, but no worries—you can easily add one from the product detail page and purchase it along with your scooter.

The L2 Max Dual Motor comes equipped with two charging ports. With two 1.5A chargers, a full charge takes around 7 hours. Using just one 1.5A charger, it’ll take about 14 hours. Please note that the package includes one charger by default, but you can easily purchase an additional one from our online store to speed things up.

• Turn the power off, unplug the scooter, and cover the charging ports and USB outputs before cleaning the scooter. We suggest you use a soft and dry cloth to wipe the mainframe clean. Do not clean your e-scooter with alcohol, gasoline, acetone, or other corrosive or volatile solvents, as they can damage the appearance and internal structure of your e-scooter. Do not soak the scooter or wash it with a power washer or hose.

• Park mode is designed to prevent accidental starts, which activates automatically after 30 seconds of inactivity. In Park mode, the scooter cannot be started even if the throttle is pressed. To exit Park mode, simply press the Plus button.

For L2/L2 Max/DT2 Pro/F1 Max

When the display is turned on, long press + and - to enter or exit the hidden menu. In the hidden menu, short press Power Button to switch among different parameter pages from P01 to P23. On the parameter page, press + or - to increase or decrease the value.

P02: Switching between km and mile. 0 means km and 1 means mile. (Default: 0 or 1)

P04: Setting the sleep time between 0-60 minutes. 0 means it never sleeps. (Default: 5 minutes)

P08: Setting the speed limit between 5-100. 100 means 100% of the maximum speed. (Default: 100)

P09: Switching between zero and non-zero start, 0 means zero start, and 1 means non-zero start. (Default: 1)

P11: Setting the EABS brake force level, ranging from 1 to 5. 0 means off, 1 means the weakest and 5 means the strongest. (Default: 3)

P12: Setting the soft and hard start strength, ranging from 1 to 5. 1 means the softest and 5 means the hardest. (Default: 5)

P17: Cruise control: 0 means the cruise mode is off, and 1 means the cruise mode is on. (Default: 0)

P18: Binding and unbinding the NFC card. Long press + to bind, and long press - to unbind.

P19: Adjusting the backlight brightness. Level 1 is the darkest and level 3 is the brightest. (Default: level 3)

P23: Changing password. Enter the original password first. To enter the password, press + or - to select the number for the current digit and press Power Button to move to the next digit. After entering all the digits, press Power Button for 2 seconds till "S23" appears on the display. Then, enter a new 4-digit password and press Power Button for 2 seconds to save it.

Note: Parameter pages not listed above are not adjustable.

🔗 Download User Manual